How to Assemble Your Lionswave

  • 1) Wrap the band around your wrist and note which closure hole fits you best.

  • 2) Put the band down so the silver button is on the left and you can see "RISE STRONGER" on the right.

  • 3) With the lion's head facing up, open the locket so the hinge of the locket is at the back.

  • 4) Lay the band across the bottom plate of the locket. Slide the band so that the lion is centered between the silver button and your closure hole. If you have a Wave, it should be located to the left of the locket.

  • 5) Place the crystal on top of your band and close the locket over the crystal to secure it inside.

  • 6) Pick up the three pieces as a unit and make sure the larger end of the infinity clasp is dangling below the lion and in line with the ball at the end of the plate.

  • 7) With slight pressure, secure the larger end of the infinity clasp over the ball at the end of the "Lionswave" plate. The infinity clasp will be at a slight angle when closed.

  • If your infinity clasp ever becomes too loose, you may choose to tighten it by pinching the center part together with needle nose pliers.

How to Care for your Lionswave Crystal

TO RE-ENERGIZE a HEALING CRYSTAL there are a few methods you can try

  • SUNLIGHT

    Place the crystal in direct sunlight for a few hours to re-charge its energy. Do not leave it in the sun too long as prolonged sunlight may lead to fading.

  • MOONLIGHT

    Place the crystal under the full light of the moon overnight. Moonlight is a gentler way to cleanse and re-charge the crystal’s energy.

  • VISUALIZATION

    Hold the crystal in your hands and visualize it being filled with vibrant, positive energy. Your intention and focus play a significant role in re-energizing the crystal.

  • RUNNING WATER

    Holding the crystal under gentle flowing water, like a natural stream or faucet, can help wash away negative energy and refresh the crystal energy.

  • OTHER CRYSTALS

    Place your crystal next to other crystals known for their re-charging abilities, such as clear quartz or citrine, to boost energy.

How to Care for your Lionswave Leather

  • Wipe it gently with a damp cloth to remove dirt and perspiration.
  • Avoid prolonged exposure to water and sunlight as it may damage the leather.
  • Apply a small amount of leather cleaner or conditioner to keep it moisturized and prevent it from drying out or cracking.